河北380V電動混凝土切樁機CZJ-700型可調節鋸片高度

切樁機來了，給大家?guī)硪豢詈脵C(jī)器，給大家來說一下哦，這款切樁機可調節鋸片高度，可升降款哦，可切割混凝土水泥樁子，實心空心都可以，力氣很大的，我們采用的耐磨防滑輪胎，還擔心什么呢，要不我送您一臺，您試試？

Pile cutting machine came, to bring you a good machine, for everyone to say, Oh, this pile cutting machine can adjust the height of the saw blade, can lift, oh, can cut concrete cement piles, solid hollow can, great strength, we use wear-resistant anti-skid tires, why worry about it, or I give you one, you try?

混凝土切樁機參數：

鋸片直徑：300-700mm

電機功率：7.5KW

主軸轉速：1900r/min

整機質量：150kg

鋸片可裝500-700金剛石鋸片，買機器的時候建議買我們配套的鋸片，因?yàn)槲覀兊墓に嚭苜?，質量很好哦！

 The Motor is equipped with three-slot b-type v-belt pulley. The motor power is driven by three v-belts to drive the main shaft of the saw blade. Buy This model of pile cutting machine happy work! A great journey can be made with ordinary steps. Cement hollow solid pile cutting machine use method: 1. Pull out the collar pin of the pipe pile cutter, open the jacket and take out the inner jacket. 2. The inner sleeve is fixed on the pile head to be cut off with the fixing screw. 3. Then, the jacket of the pile collar of the pipe pile cutting machine is installed on the inner sleeve. 4. The Hook of the pile head cutter is directly set into the hole of the pile collar, cutting the pile head along the lateral direction, such as cutting imbalance can be adjusted by the hook screw.

電動機裝有三槽B型三角帶輪，電機動力經三根三角帶拉動鋸片主軸轉動，進行切割作業，可升降可升高。

買了這款切樁機開心的工作吧！

平凡的腳步也可以走完偉大的行程。

水泥空心實心切樁機使用方法：

1.將管樁切樁機樁箍插銷拔出，打開外套，取出內套。

2.用固定螺絲將內套固定在需截去的樁頭上。

3.再將管樁切樁機樁箍外套安裝在內套上。

4.將樁頭切割機上的掛鉤直接套入樁箍外套掛孔上，沿著周圍橫向切割樁頭，如切割不平衡可以通過掛鉤螺絲進行調節。